Industrial Activated Carbon Tower for VOC Control Paint Extraction
request a quote
Industrial Activated Carbon Tower for VOC Control Paint Extraction
PRODUCT DESCRIPTION: ACTIVATED CARBON TOWER – PAINT EXTRACTION & VOC ABATEMENT EQUIPMENT
The Paint Extraction System with Activated Carbon Tower is designed to capture paint mist and Volatile Organic Compounds (VOCs) generated inside the painting room. The system filters and absorbs these contaminants, discharging only odorless, clean air into the atmosphere. This process protects worker health by preventing inhalation of harmful chemicals and reduces fire or explosion risks by eliminating dangerous fume accumulation.
How It Works
A centrifugal fan creates suction within the ductwork. During painting operations, paint mist and VOCs are extracted through grills installed on the interior walls of the painting room. Each grill is fitted with a primary filter designed to trap paint mist while allowing VOCs to pass through via specially designed gaps. The VOCs then travel through the ducting to the Activated Carbon Tower, where activated carbon charcoal purifies the air by absorbing odors and VOCs. Finally, clean air is released safely into the atmosphere.
Key Components
- Grill – Installed inside the painting room for extraction
- Primary Filter – Mounted within the grill to trap paint mist
- Ducting – Conveys extracted contaminants to the tower
- Centrifugal Fan – Creates suction and discharges clean air
- Activated Carbon Tower – Filters VOCs and removes odors using activated carbon charcoal
technical specifications
| Sl No. | Description | Unit | Specification |
|---|---|---|---|
| 1 | Manufacturer | – | Euroblast Middle East LLC |
| 2 | Type/Model | – | Activated Carbon Tower (EB-ACT 1500-122) |
| 3 | Adsorption Material | – | Activated Carbon (4×8 Mesh) |
| 4 | Process Media | – | Air + Paint fumes |
| 5 | Disposal Air Flow Range | m³/min | 250 – 1500 |
| 6 | Absorption Speed | m/s | 0.5 |
| 7 | Absorption Time | sec | 1 |
| 8 | Bed Quantity | – | 4 Stage |
| 9 | Air Filter Specifications | – | – |
| 9.1 | Filter Type (Primary) | – | HFL 2038 |
| 9.2 | Material (Primary Filter) | – | 100% Polyester Non-Woven |
| 9.3 | Particle Size (Activated Carbon) | % | 95 |
| 9.4 | Ash Content (Activated Carbon) | % | 4.3 |
| 9.5 | Iodine Number | mg/g | 953 |
| 9.6 | Surface Area | m² | 988 |
| 9.7 | Apparent Density | g/cm³ | 0.48 |
| 9.8 | Moisture | % | 3.5 |
| 9.9 | Ball Pan Hardness | % | 98 |
| 9.10 | pH | – | 8 |
| 10 | Manometer | mm.Aq | 0–300 |
| 11 | Driving Method | – | Electrical motor with fan blower |
| 12.1 | Motor Power | – | 90 kW, 400VAC, 3PH, 60Hz |
| 12.2 | Fan Blower Range | m³/min | 250 – 1500 |
| 12.3 | Pressure Loss | mm.Aq | 200 |
| 13 | Starting Method | – | Soft Starter |
| 14 | Maximum Noise Level | dB | 89 |